Non-destructive monitoring and prediction of fouling by organic matters and residual anionic coagulant during membrane process

Chemosphere. 2024 May:356:141778. doi: 10.1016/j.chemosphere.2024.141778. Epub 2024 Mar 28.

Abstract

Physical fouling characteristics on silicon carbide (SiC) membranes induced by various organic matter compounds vary depending on the presence of calcium ions (Ca2+). Both destructive techniques (morphological surface analysis) and non-destructive techniques (fouling properties monitoring) were used to determine the fouling mechanisms and behavior during the membrane filtration systems. Destructive analysis and a modified Hermia model were employed to assess the fouling mechanisms. Fouling behavior was also analyzed through non-destructive monitoring techniques including optical coherence tomography (OCT) and three-dimensional laser scanning confocal microscopy (3D-LSM). At concentrations of 10, 30, and 100 mg/L without Ca2+, the flux decreased by 57-95% for humic acid (HA) and anionic polyacrylamide (APAM). APAM exhibited a notable removal rate of up to 56% without Ca2+. At concentration of 10, 30, and 100 mg/L in the absence of Ca2+, the flux decreased by 6-8% for sodium alginate (SA). However, the addition of Ca2+ led to a reduction in the flux for SA by up to 91% and resulted in a removal rate of 40%. Furthermore, addition of Ca2+ led to an alteration of the fouling characteristics of HA and SA. In the case of HA, higher concentrations resulted in elevated thickness and roughness with correlation coefficients of 0.991 and 0.992, respectively. For SA, increased SA concentration led to a thicker (correlation coefficient of 0.999) but smoother surfaces (correlation coefficients of 0.502). Monitoring of these physical characteristics of the fouling layer through non-destructive analysis is crucial for effective fouling management, optimization of the system performance and extending the lifespan of the membrane. By continuously assessing the fouling layer thickness and surface roughness, we expect to be able to provide insights on the fouling behavior, identify trends, that can help scientists and engineers to make informed decisions regarding fouling control strategies in future.

Keywords: Fouling mechanism; Membrane bioreactor; Non-destructive technique; Optical coherence tomography; Three-dimensional laser scanning confocal microscopy.

MeSH terms

  • Acrylic Resins* / chemistry
  • Alginates / chemistry
  • Anions / chemistry
  • Biofouling / prevention & control
  • Calcium / analysis
  • Calcium / chemistry
  • Filtration* / methods
  • Humic Substances* / analysis
  • Membranes, Artificial*
  • Water Purification / methods

Substances

  • Membranes, Artificial
  • Humic Substances
  • Acrylic Resins
  • Calcium
  • polyacrylamide
  • Anions
  • Alginates