Semi-dry desulfurization is an efficient means of SO2 removal from the effluent gases from electrolysis cells in aluminum smelters. These gases are at low temperature and contain low concentrations of SO2, as opposed to thermal power plants. The removal is carried out by injecting powdered alkaline sorbent, hydrated lime (solid particles), into the SO2-containing gas (gas phase) in the presence of humidity. The reaction is controlled by the adsorption of SO2 onto the surface of lime. This study involves the mathematical modelling of a lab-scale scrubber using a Lagrangian-Eulerian approach in order to analyze the desulfurization efficiency. The model was validated based on experimental data. A parametric study was carried out to investigate the effects of particle size, sorbent amount, and relative humidity (RH) on the desulfurization efficiency. The results show that the particle size is the most important parameter; as the particle size decreases, the desulfurization efficiency increases. However, using finer particles may increase the process cost. The loss in SO2 capture efficiency due to the use of coarser particle size could be compensated by increasing the relative humidity (RH) of the gas, another key parameter of the process.
Keywords: Aluminum electrolysis; Computational fluid dynamics (CFD); Lagrangian-Eulerian method; Particle surface reaction; Semi-dry desulfurization.
Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.